Ir Remote Control; Installation And Mounting - Cameo ROTOFEVER CLRF Bedienungsanleitung

IR REMOTE CONTROL

INSTALLATION AND MOUNTING

Due to its integrated rubber feet, the effect spotlight can be positioned in a suitable location on the stage floor etc. It can be mounted on a
traverse using the Omega mounting bracket supplied along with a suitable traverse clamp (not included). Ensure firm attachment and fix the
device securely to the safety eyelet A using a suitable safety cable.
Important: Overhead installation may only be carried out by qualified personnel.
Aim the infrared remote control directly at one of the infrared sensors installed on the front and back of
the lamp. The maximum range is approximately 8 metres. In DMX and slave modes, the remote control is
deactivated.
Blackout
ON/OFF
Auto programme
AUTO
Sound control
MUSIC
Pause
Change of value
A
Programme speed
B
Rotation speed
C
0 - 9
Numeric keys
Rotation
-/--
The ON/OFF button is used to switch off the Rotofever LEDS
and the rotation, regardless of the mode enabled via the re-
mote control. The previously selected mode is re-activated
by pressing the ON/OFF button again.
Starts the last auto programme selected. When pressed
again, the next auto programme is selected.
Starts the last sound programme selected. When pressed
again, the next sound programme is selected.
Stops rotation. Press again to continue rotation.
Increase (right) and decrease (left) using the
parameters selected with the letter keys.
Enables programme speed selection.
Enables rotation speed selection.
No function
No function
Changes the direction of rotation
No function
9