Daily Use - ZANKER KDT10053FK Benutzerinformation

How to fill the rinse aid dispenser

Daily use

1. Open the water tap.
2. Press and hold
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme is
complete.
Using the detergent
A B
C
Caution! Only use detergent specifically
designed for dishwashers.
1. Press the release button (A) to open the lid (C).
2. Put the detergent, in powder or tablets, in the
compartment (B).
3. If the programme has a prewash phase, put a small
quantity of detergent on the inner part of the
appliance door.
12
A B
C
until the appliance is activated.
Caution! Only use rinse aid designed
specifically for dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid reaches the
marking ''MAX''.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the lid locks into
position.
Fill the rinse aid dispenser when the
indicator (A) is clear.
4. Close the lid. Make sure that the lid locks into
position.
How to select and start a programme
1. Press the button dedicated to the programme you
want to set.
The light related to the button flashes.
2. Activate Extra power if desired.
3. Close the appliance door to start the programme.
How to activate Extra power
1. Select a programme.
2. Press Extra power.
The light related to the button is on.
Extra power is not a permanent option
and must be activated every time before
you start a programme.
It is not possible to activate or deactivate
Extra power while a programme is
running.
Activating Extra power increases the
water and energy consumption as well
as the programme duration.
How to select and start the programme AUTO
1. Press AUTO.
The light related to the button is on.
Extra power is not applicable to this
programme.