Daily Use - ZANKER KDT10001FB Benutzerinformation

3

Daily use

1. Open the water tap.
2. Press the on/off button to activate the appliance.
• If the salt indicator is on, fill the salt container.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type
of load and the degree of soil.
Using the detergent
1
A
B
3
Put the detergent or the tablet in compartment (A) If
the programme has a prewash phase, put a small
quantity of detergent in compartment (B).
1
A
2
4
1
2
2
4
Fill the rinse aid dispenser when the lens (A) is
clear.
To adjust the released quantity of rinse aid, turn the
selector between position 1 (lowest quantity) and posi-
tion 4 (highest quantity).
Using the combi detergent tablets
When you use tablets, that contain salt and rinse aid,
do not fill the salt container and the rinse aid dispens-
er. The rinse aid indicator always comes on if the rinse
aid dispenser is empty.
1. Adjust the water softener to the lowest level.
2. Set the rinse aid dispenser to the lowest position.
If you stop to use the combi detergent tablets,
before you start to use separately detergent, rinse
aid and dishwasher salt, do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the rinse aid
dispenser are full.
3. Start the shortest programme with a rinsing
phase, without detergent and without dishes.
4. Adjust the water softener to the water hardness in
your area.
5. Adjust the released quantity of rinse aid.
Setting and starting a programme
Reset function
For some settings it is necessary that the appliance is
in user mode.
The appliance is in user mode when all the pro-
gramme indicators are on.
To set the appliance in user mode, do the Reset func-
tion
1. Press and hold the programme button until all the
programme indicators come on.
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate the appliance.
19