Hints And Tips - ZANKER KDT10053FK Benutzerinformation

2. Close the appliance door to start the programme.
The appliance senses the type of load and adjusts a
suitable wash cycle.
How to delay the start of a programme
You can delay the start of the selected programme by 3
hours.
1. Select a programme.
2. Press
.
The light related to the button is on.
3. Close the appliance door to start the countdown.
During the countdown, it is not possible to change the
programme selection.
When the countdown is complete, the programme
starts.
How to cancel the delay start while the
countdown operates
Press and hold for about 3 seconds.
The appliance returns to the programme selection.
If you cancel the delay start, you have to
select the programme again.
How to cancel a running programme
Press and hold for about 3 seconds.
The appliance returns to the programme selection.

Hints and tips

General
Follow the hints below to ensure optimal cleaning and
drying results in daily use and to protect the
environment.
• Washing dishes in the dishwasher as instructed in
the user manual usually consumes less water and
energy than washing dishes by hand.
• Load the dishwasher to its full capacity to save
water and energy. For best cleaning results, arrange
items in the baskets as instructed in the user
manual and do not overload the baskets.
• Do not pre-rinse dishes by hand. It increases the
water and energy consumption. When needed,
select a programme with a prewash phase.
• Remove larger residues of food from the dishes and
empty cups and glasses before putting them inside
the appliance.
• Soak or slightly scour cookware with firmly cooked-
on or baked-on food before washing it in the
appliance.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
Opening the door while the appliance operates
Opening the door while a programme is running stops
the appliance. It may affect the energy consumption and
the programme duration. After closing the door, the
appliance continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
The Auto Off function
This function saves energy by switching the appliance
off when it is not operating.
The function comes into operation automatically:
• When the programme is completed.
• After 5 minutes if a programme was not started.
End of the programme
When the programme is complete, the Auto Off function
switches the appliance off automatically.
All buttons are inactive except for the on/off button.
• Make sure that items in the baskets do not touch or
cover each other. Only then can the water
completely reach and wash the dishes.
• You can use dishwasher detergent, rinse aid and
salt separately or you can use the multi-tablets (e.g.
''All in 1''). Follow the instructions on the packaging.
• Select a programme according to the type of load
and the degree of soil. ECO offers the most efficient
use of water and energy consumption.
• To prevent limescale buildup inside the appliance:
– Refill the salt container whenever necessary.
– Use the recommended dosage of the detergent
and rinse aid.
– Make sure that the current level of the water
softener agrees with the hardness of the water
supply.
– Follow the instructions in the chapter "Care
and cleaning".
13