Maintenance; Special Accessories - Scheppach ha 1800 Originalanleitung

m Maintenance
For all maintenance and cleaning tasks, tum off motor
and unplug mains.
• Connection and repair work on the electrical installation
may be carried out by a qualified electrician only.
• For constant performance, periodi cally shake out filter
bag vigorously. Between cleanings, beating the bag with
the hand several times is sufficient.
• The sawdust bag must be replaced a1 the latest when
the sawdust is within 10 cm. of the housing collar.

Special accessories

Filter bag U/S/G
Filter catridge U/S/G
EC Declaration of Conformity
We herewith declare, Scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH,
Günzburger Str. 69, D-89335 Ichenhausen that the machine described below due
to its con struc tion and design and in the version delivered by us complies with
the relevant provisions of the following EC Directives.
In case of a modification of the machine this declara tion ceases to be valid.
Machine description:
Dust extractor
Machine model:
ha 1800 - Art.No. 75120901
Relevant EC directives:
EC machine directive 2006/42/EG,
EC Low voltage directive 2006/95/EWG,
EC-EMV directive 2004/108/EWG.
Applied harmonized European Standards:
EN 12100-1, EN 12100-2, EN 13857, EN349, EN418, EN1088, EN60204-1, EN55014,
EN60555-2, EN 50082-1, EN60555-3, EN 61029-1, EN 61029-2-1, EN 60825-1
Applied european Standards:
EN 847-1, EN 13849-1
Applied national technical standards and specifications, especially:
ISO 7960
Notified body within the meaning of Annex VII
TÜV Rheinland
Engaged for
EC design examination (EC design certification no. AN 50039334 0001), GS
examination no. BM 60008940 0001
Date
Ichenhausen, 02.07.2009
Signature:
Werner Hartmann (technical director)
Part no. 7508 0010
Part no. 7500 6000
Dodatna oprema
Filtrirna vreča U/S/G
Filtrirni vložek U/S/G
Izjava o skladnosti evropske skupnosti
S tem izjavljamo, da Scheppach Fabrikation von Holzbearbeitungsmaschi-
nen GmbH, Günzburger Str. 69, D-89335 Ichenhausen, da v nadaljevanju
označena naprava na podlagi njene konstrukcije in načina izdelave ter naša izde-
lava , ki smo jo dali v promet, ustreza zadevnim določilom naslednjih ES-smernic.
Pri predelavi naprave ta izjava izgubi veljavnost.
Oznaka naprave:
Odsávacie zariadenie ha 1800
Tip naprave:
ha 1800 - Art.No. 75120901
Příslušné normy EC
Strojní směrnice 2006/42/EC,
Směrnice o nízkém napětí 2006/95/EC
Směrnice EC EMV 2004/108/EC.
Angewandte harmonisierte Normen:
EN 12100-1, EN 12100-2, EN 13857, EN349, EN418, EN1088, EN60204-1, EN55014,
EN60555-2, EN 50082-1, EN60555-3, EN 61029-1, EN 61029-2-1, EN 60825-1
Angewandte europäische Normentwürfe:
EN 847-1, EN 13849-1
Angewandte nationale technische Spezifikationen und Normen:
ISO 7960
Prijavno mesto:
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
D–51101 Köln
Vključena za:
GS-Prüfung S 50049571
Kraj, datum:
Ichenhausen, 02.07.2009
Werner Hartmann (technical director)
št. art. 7508 0010
št. art. 7500 6000
17