Konig + Neurath TALO.S Bench Montageanleitung Seite 45

Linear configuration
Attach the connecting
plates (a) to the cross-
beams of both desk
frames from below with
pan-head screws M6x16.
(SW4).
Fitting the desk
screen (in 3rd-level
and clamp adapters)
Remove cover (a) and
snap off the central part.
Attach cover (b) and insert
clamp adapter (c) into the
desk adapter, tighten grub
screw (d), SW3.
Insert the screen (e) into
the clamp adapter and align
laterally. Tighten counter-
sunk screw (f) M6x16
(SW4) on rear of adapter.
Slide clamp adapter (g) on-
to desk top, insert screen
into adapter, tighten coun-
ter-sunk screw (h) M6x16
on rear of adapter and
tighten clamp bolt (i) under
desk top (SW4).
Safety instructions:
Ensure that the bench and its attachments have a minimum clearance
of 25 mm to other objects in all movable desk positions. Desks arranged
in a block pose a particular risk of crushing and shearing.
You must follow the safety instructions! Improper use of
the system poses a risk of material damage and personal
injury!
(a)
snap off
(a)
(e)
(f)
42
(a)
(c)
(b)
(h)
view from
below
(d)
(g)
(i)