Bosch myMUM MUM5 7S Serie Gebrauchsanleitung Seite 42

en Troubleshooting
Fault
The swivel arm cannot
be opened or closed
because the tool is
jammed in the bowl.
42
Cause and troubleshooting
Drive is not in the parked position after a safety sys-
tem has stopped processing or the power supply has
been interrupted.
Set the rotary switch to
1.
Eliminate the problem that caused the appliance to
2.
stop.
→ "Safety systems", Page 36
When the swivel arm is open, remove the tool and
3.
close the swivel arm.
Set the rotary switch briefly to and then back to
4.
⁠ .
a The drive remains on for a short time until the
parked position is reached.
⁠ .