Behringer MODEL D Schnellstartanleitung Seite 75

Mixer Section
Knobs
Switches
LED
Filter Section
Knobs
Switches
Output Section
Loudness contour
dynamic range:
Knobs
Switches
LED
Inputs (TS 3.5 mm)
Modulation source
Oscillator 1
LFO
External input
Cutoff frequency
Loudness
Filter contour
Loudness contour
Volume (OSC 1, 2, and 3): 0 to 10
Volume (external input): 0 to 10
Volume (noise): 0 to 10
OSC 1, 2, and 3: on/off
External input: on/off
Noise: on/off
Noise source: pink or white
Overload
Cutoff frequency: -4 to +4
Filter emphasis: 0 to 10
Amount of contour: 0 to 10
Attack: 1 ms to 10 s
Decay: 4 ms to >35 s
Sustain: 0 to 10
Filter mode: low pass/high pass
Filter modulation: on/off
Keyboard control 1: on (1/3) or off
Keyboard control 2: on (2/3) or off
Filter decay: on/off
80 dB
Volume: 0 to 10
Headphone volume: 0 to 10
Amount of contour: 0 to 10
Attack: 1 ms to 10 s
Decay: 4 ms to >35 s
Sustain: 0 to 10
Main output: on/off
A-440: on/off
Loudness decay: on/off
Power
Noise is the modulation source if there is no connection present
Control voltage: 1 V per octave
Control voltage: -5 V to +5 V
Input impedance: 1 MΩ
Control voltage: 0 to +5 V controls the cutoff frequency
Control voltage: 0 to +5 V controls the loudness
Gate: +5 V input triggers the filter contour
Gate: +5 V input triggers the loudness contour
75
Quick Start Guide