Installing The Top And Side Metal Pieces; Installing The Top And Side Platforms - Swim & Fun Classic Oval Steel Pool Bedienungsanleitung

UK

10. Installing the Top and Side Metal Pieces

Hook the top metal pieces over the top of the rail between the rail connections and align with the
Bottom Metal Pieces (Diagram 33). Place the Side Metal Pieces over the top of the Vertical Side
Beams and Rails and screw into place. (Diagram 34).

11. Installing the Top and Side Platforms

Note
Make sure that you place the longer side of the top platform facing out and the shorter side
facing inside the pool.
Place the two Side Top Platforms on top of the Rails and align the holes over the Side Top Metal
Piece. Using four Bolts, Washers, Spring Washers, attach the Side Top Platforms to the Side Top
MV-2908-2909-2920-2021-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
139