UK
6.
Fixing the Pool Wall
Place the Bottom Metal Piece's between the joins of the Rails with the triangular end pointing out
from the pool wall. (Diagram 18).
Place the Inside Bottom Protector over the Steel Belt and screw into the Horizontal Side Beam.
Note
Ensure the PVC Sleeve covers the Steel Belt to prevent damage or rust effecting the
pool (Diagram 19).
Caution
Wear Protective
gloves when hand-
ling the metal wall.
Place the Metal Pool Wall
with the Skimmer Hole
at the top, onto a piece
of cardboard, ply wood
or ground cloth to protect
the leveled ground during
installation.
MV-2908-2909-2920-2021-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
133