Swim & Fun Classic Oval Steel Pool Bedienungsanleitung Seite 132

UK
Connect the Steel Belt to either
end of the Left and Right Side Pool
Frames. (Diagram 12 and 13).
Make sure the Steel Belt is pro-
tected by the PVC Sleeve which is
provided in the package. This will
protect the Pool Liner from dam-
age.
5.2 Pool Wall Rail and Rail Connector setup
Position the Left and Right Side Wall Frame in the middle of the prepared area (Diagram 14). Place
the Rails around the area where the pool wall is to be installed. (Diagram 14). Connect the Rails
together using 2 Rail Connectors per Rail (See diagram 15) and leave a 1.5 cm gap between each
connection (Diagram 16). Connect the Side Rails to the Side Bottom Metal Piece A and B on either
side of the Pool Wall Frame Supports (Diagram 17).
MV-2908-2909-2920-2021-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
132