FIMAR SV25 Benutz Und Wartungsanleitung Seite 21

Do not clean the appliance with jets of water to avoid damaging the components, particularly the electric and elec-
–
tronic components.
Thoroughly clean and dry all the appliance parts (inside and outside) in case of its prolonged downtime. Disconnect
–
the power supply cable and make sure the environmental conditions are adequate to preserve the appliance in time.
The list states the conditions necessary for proper electrical equipment operation based on the surrounding environ-
ment.
Ambient temperature not below 5°C.
–
Relative humidity between 50% (detected at 40°C) and 90% (detected at 20°C).
–
The environment must be free of areas with potentially explosive dust and gas concentration and/or at risk of fire.
–
The activity can affect the environment and, for this reason, emissions into the atmosphere, draining liquids and soil
–
contamination, use of raw materials and natural resources and waste management must be considered.
The environment temperature during transport and storage must be between -25°C and 55°C with a maximum of
–
70°C, as long as the time of exposure does not exceed 24 hours
The packaging components must be disposed of according to the laws in force in the country of use.
–
During disposal and scrapping, select all materials based on their features and arrange for the separate disposal.
–
Dispose of electric and electronic components marked with a specific symbol in appropriate authorised collection
–
centres or return them to the dealer when purchasing new components.
The Electric and Electronic Appliances contain dangerous substances with potentially toxic effects on per-
sonal health and on the environment. We recommend properly disposing of them.
SAFETY INDICATORS AND INFORMATION
Safety signals are placed on the appliance, in correspondence of the areas with RESIDUE RISKS, informing on the
relative risk.
The illustrations show the safety signals and information placed on the appliance.
Burn hazard: indicates that care must be taken not to be burned by the hot surfaces.
–
Electric shock hazard:signals the need to disconnect the main electric power (or disconnect the
–
electric plug) before intervening on the electric connections.
FIMAR-RUSSIA.RU +7 495 989 1055
GENERAL INFORMATION
6