Adjusting Language; Display; Reset - Dal Zotto DZ LP30 Benutzerhandbuch

sCreeN eNTry AND exPLANATION
CONTROLS PROCEDURE
Š Turn P2 to select the icon
Š Press P2 to confirm
Š Turn P2 to select "SET CHRONO"
Š Confirm, pressing P2
Š Turn P2 to select the desired parameter
Š Press P2 to enter modification mode
Š Turn P2 to modify the value
Š Press P2 to confirm and exit
Š If you wish to exit without memorising, press key P1
SCReen
START PRG1
STOP PRG1
MONDAy PRG1
TUESDAy PRG1
WEDNESDAy PRG1
THURSDAy PRG1
FRIDAy PRG1
SATURDAy PRG1
SUNDAy PRG1
SET PRG1

ADjusTINg LANguAge

• see chapter: commissioning settings

DIsPLAy

Activating OFF, the back light of the display will go off after a preset delay.
The back light will go on as soon as a key is pressed or if an alarm should be triggered in the machine.
CONTROLS PROCEDURE
Š Turn P2 to select the icon
Š Press P2 to confirm
Š Turn 2 to select "DISPLAy"
Š Confirm, pressing P2
Š Turn 2 to select ON - OFF
Š Press P2 to confirm and exit
Š If you wish to exit without memorising, press key P1

reseT

Allows to reset all values modifiable by the user to the default values.
CONTROLS PROCEDURE
Š Turn P2 to select the icon
Š Press P2 to confirm
Š Turn 2 to select "RESET"
Š Confirm, pressing P2
Š Turn 2 to select ON
Š Press P2 to confirm
Š The display will show "DONe" to confirm the command.
68
00:00
00:00
ON
OFF
OFF
OFF
OFF
OFF
OFF
75°C
| eNgLIsh
SET CHRONO
START PRG1
STOP PRG1
MONDAy PRG1
...
explanaTion
First time slot ignition time
First time slot switch-off time
Day allowed or not (on - off )
Day allowed or not (on - off )
Day allowed or not (on - off )
Day allowed or not (on - off )
Day allowed or not (on - off )
Day allowed or not (on - off )
Day allowed or not (on - off )
Setting water t°
DISPLAy
display off
RESET
Reset on