Pellets And Feeding - Dal Zotto DZ LP30 Benutzerhandbuch

PeLLeTs AND FeeDINg

Pellets are made by subjecting wood shavings i.e. the rejects of pure wood (without paint) sawmill, carpenter products and
products from other activities connected to working and transforming wood, to very high pressures.
This type of fuel is fully ecological as no glues are used to hold it together. In fact, the compactness of the pellets is guaranteed
over time by a natural substance that is found in wood: lignin.
As well as being an ecological fuel, as wood residues are made the most of, the pellet also has technical advantages.
While wood has a calorific value of 4.4 kW/kg. (with 15% humidity, therefore after about 18 months seasoning), that of the pellet
is 5 kW/kg.
Pellet density is about 650 kg/m
seasoned in order to obtain a sufficiently adequate heat yield.
The pellet used must comply with the features described by Standards:
Š eN PLus - uNI eN 16961 - 2 class A1 or A2
Š Ö-NOrM M 7135
Š DIN PLus 51731
Dal Zotto recommends using pellets with a diameter of 6mm with its products.
PeLLeT sTOrAge
To guarantee combustion without problems, the pellets must be kept in a dry place.
Open the tank lid and load the pellets using a scoop.
The use OF POOr quALITy PeLLeTs Or
ANy OTher MATerIAL DAMAges The
FuNCTIONs OF yOur sTOVe AND CAN
VOID The WArrANTy AND The ANNexeD
resPONsIbILITy OF The MANuFACTurer.
and water content is equal to 8% of its weight. For this reason the pellets do not need to be
3
| eNgLIsh
59