Features; Special Features - Bosch Rexroth PST 6 115 Serie Typspezifische Anleitung

R911172820 | PST 6xxx.115x
7

Features

Sequence standard 50/60 Hz (
I/O board:
1. PS5 EA Disk2R, Double start, double prelift, relay output
2. PS5 EA Disk4R, Double start, double prelift, relay output
(Details refer to Tab. 1: Required and supplementary documentation, Rexroth
PST6xx0 Weld timer with Thyristor power unit Instruction Manual).
7.1

Special features

The control features the following specifics:
 Control is prepared for a networking with an Interbus-PMS or Profibus-FMS or
Ethernet assembly.
 With pressure output
 With pressure feedback
 Via the input: „Lamp test" the function: „Lamp test" is activated
With active lamp test the following outputs are set:
X11/A02 Weld Timer Control Ready
X11/A03 Weld Timer Control Fault
X11/A07 Tip Life Pre-Warning / Life expired 1
X11/A08 Tip Life Pre-Warning / Life expired 2
X11/A09 End of stepper 1
X11/A10 End of stepper 2
 The "Stop circuit open / no 24V" fault is automatically reset.
 The DC link voltage is always verified, the fault message is automatically
reset.
 With start tip dress request function.
 With diagnosis outputs of status- and fault number for 7-display (BCD)
Bosch Rexroth AG
sequence parameter in net periods)
41/50
Features