Inspection; Maintenance; Packaging And Storage; Sterilisation - Coltene CanalPro Jeni Aufbereitungsanleitung

CanalPro Jeni
2.4.

Inspection

After cleaning or cleaning/disinfection, check all products/product components for cracks, damaged surfaces, dirt and discolouration and
remove damaged products/product components (for the numerical restriction on reuse see the chapter `Reusability´). Products/product
components that are still dirty must be cleaned and disinfected again.
2.5.

Maintenance

Instrument oils must not be used.
2.6.

Packaging and storage

Packaging is not required.
Repeat the cleaning/disinfection (see the chapter `Cleaning/Disinfection´) at the beginning of each day of treatment.
2.7.

Sterilisation

Sterilisation is generally not permitted.
2.8.

Reusability

The products/product components can – with due care and provided they are undamaged and free of dirt – be reused at least up to the
number indicated in the chapter `Special instructions´. The user is responsible for any further use or the use of damaged and/or dirty
products/product components. All liability is excluded in the event of non-observance.
21