Coltene CanalPro Jeni Aufbereitungsanleitung Seite 15

CanalPro Jeni
Illustration 5
Illustration 6
Description of the single parts and assignment of the relevant processes
ill. Ref.
1 60023660
2 60023787
3 60024087
60023788
60023789
60023790
60023791
60023792
60023794
4
60024252
5 60023661
6 60024170
A3* Note the user manual and processing instructions for the contra-angle: See document 645 2110
Description
Only the control unit with a touch screen
Power supply with primary plug
Input: 100 – 240 V AC Output: 12 V DC 1.50 A
Bluetooth wireless foot switch, single pedal
Apex cable set
consisting of:
4a – Measuring cable with plug
4b – Lip clip
4c – Cap for the plug socket
4d – Cable for file clamp
4e – File clamp (can be dismantled)
The file clamp can be dismantled (see illustration 4e)
To dismantle, the contact is unscrewed and removed from the knob. You can
clean all parts individually.
At the end of assembly, firmly tighten the contact again. Caution. Check if the
device is functioning properly. Loose parts may fall out and enter the patient's
mouth.
Retainer for apex cable 4f (mounted on the device)
Contra-angle handpiece with apex measurement / fully insulated
1:1 gear, with ISO-E coupling
Motor with apex measuring contact,
LED power indicator and ISO-E connection
Chapter
Ch. 2
Ch. 2
Ch. 2
Ch. 2
Ch. 1
Ch. 1
Ch. 1
Ch. 1
Ch. 1
A3*
Ch. 2
15