Grundig GV 470 S VPT Serviceanleitung Seite 59

7. Special Functions
Operation with a Camcorder
Sound signal L/R
VHS
Picture signal
Sound signal L/R
S-VHS
Picture signal
Connecting
Open the front cover of the recorder.
Video signal
Connect the VIDEO IN/CV socket of your recorder with the
corresponding video socket of the camcorder.
S-VHS picture signal
Connect the S-VHS socket of your recorder with the corre-
sponding picture signal socket of your camcorder.
Camcorder with mono sound
Connect one of the L AUDIO IN R sockets of your recorder
with the audio socket of your camcorder.
Camcorder with stereo sound
Connect the L AUDIO IN R sockets of your recorder with the
audio sockets of your camcorder.
SYNCHRO EDIT
1 2
L AUDIO IN R VIDEO IN
S-VHS
MIC
S-VHS
INSERT DUBBING
MANUAL
EW/ED OK
CHECK SET
TIMER CL
ON/OF
Preparation
Switch the TV set on (which you can use as a monitor) and
select the programme position for video playback.
Insert the cassette to be copied into the camcorder and a cas-
sette with sufficient playing time into the recording video
recorder.
7. Special Functions
Operation with a Camcorder
Copying
Unless otherwise stated, execute the following functions
with the buttons on the video recorder.
In the playback mode of the video recorder, locate the end of
the scene where the new recording is to be joined and press
K
the button (playback pause).
» II « will appear in the display of the recorder.
Switch the recorder to recording-pause by pressing both of
M ;
the buttons.
» ll « will appear in the display of the recorder.
Turn the jog wheel (inner wheel) to the left or right until
» C V « or » S I « appears in the recorder´s display.
In the playback mode of the camcorder, locate the beginning
of the desired scene. The audio recording level is automatical-
ly controlled.
If you wish to manually adjust the audio recording level,
press the button and use the buttons to
/
MANUAL
adjust the recording level until the first red mark of the sound
level display (+1 dB) lights up during the loudest passages.
Then press the pause button on the camcorder (playback
pause).
Simultaneously start playback on the camcorder and re-
M ;
cording on your recorder by pressing the buttons
again.
Copying is started and the TV screen can be used as a moni-
tor for checking.
Recording title lines
If you press the button on the remote control before or
*
during recording, the title line is added to the recording.
In order to suppress the title line, press the button on
*
the remote control again.
Terminating recording
Press the ` button to terminate recording.