Inhaltsverzeichnis
Werbung
7. Special Functions
Adding Sound at a Later Date (Dubbing)
You can add sound at a later date for any of your recordings.
L
AUDIO IN
R
from audiomixer output
(as compared to a camcorder)
Connecting
Connect the HiFi system to the
AUDIO sockets on the back
of the recorder.
R = right channel; L = left channel.
The sockets
are suitable for connecting an audiomixer
(input).
Open the front cover of the recorder.
Connect a camcorder with a commercially available cinch
cable to the L AUDIO IN R sockets on the front of the recorder.
These sockets are suitable for connecting an audiomixer
(output).
Connect a mono-microphone to the MIC socket.
The original sound of the longitudinal track is completely
erased, the HiFi (helical) track remains.
OUT
H
H
L
L
EURO-AV A1
DECODER A2
L
L
AUDIO
R
R
to audiomixer input
(as compared to a stereo system)
SYNCHRO EDIT
1
2
L
AUDIO IN
R
VIDEO IN
S-VHS
MIC
S-VHS
INSERT
DUBBING
MANUAL
EW/ED
OK
CHECK
SET
TIMER
CL
ON/OF
7. Special Functions
Adding Sound at a Later Date (Dubbing)
Preparation
Unless otherwise stated, execute the following functions
with the buttons on the recorder.
Insert a recorded cassette into the recorder.
Selecting the programme source
Turn the jog-knob right or left until the desired indication
appears in the display of the recorder:
H I
= Connect the sound source to the AUDIO sockets
on the back or the recorder, or
C V
= Connect the sound source to the AUDIO sockets
on the front side of the recorder or to the MIC
socket.
Preparing dubbing
In the playback mode, locate the tape position where dubbing
K
is to begin, then press the
button (playback-pause).
Display on the recorder: » ll «.
Press the
button (activates the dubbing-function).
DUBBING
Display on the recorder: » D U B and H I « or » D U B and C V «.
The volume is automatically adjusted.
Adjusting the volume manually
(if desired)
Press the
MANUAL
button; display on the recorder: »
«.
MAN
Press the
/
buttons to adjust the volume until the first
red mark (+1dB) lights up during the loudest passages.
Starting dubbing
J
Press the
button to start dubbing.
The original sound remains on the HiFi track and the new
sound is recorded on the longitudinal track; you hear the
"old" sound on the helical track.
Stopping dubbing
To do so, press the
button.
DUBBING
The video recorder switches to playback. You will hear the
sound recorded on the mono (longitudinal) track. » D U B «
disappears from the display.
When changing a dubbed cassette you must switch to the
mono (longitudinal) track in order to hear the new sound you
j
dubbed. To do so, press the
button on the remote con-
trol until »
2
« disappears from the display of the recorder (no
display).
If you want to hear the original recording as well as the new
recording, press the
j
button on the remote control until
the » M I X « appears.
Operation with an audiomixer
Connecting
Connect the audiomixer input to the
LR sockets (on the
back of the recorder);
Connect the audiomixer output to the L AUDIO IN R sockets
(on the front of the recorder) (see page 69 second Part of the
operating Instructions).
Operation
When the recorder is connected to an audiomixer, you can
mix the original HiFi recording of the video cassette and the
sound from an external sound source.
Werbung
Inhaltsverzeichnis
