Inhaltsverzeichnis
Werbung
7. Special Functions
Copying with ...
Video recorders/camcorders with Y chrominance
signal (separate picture and colour signal).
When operating the recorder with one of these units it is
necessary to adapt the input sockets of the recorder.
Press the
button.
ø
5
Press numeric button
in the » Info « menu to select the
line » Installation «.
The menu » Installation « appears.
5
Press numeric button
in the » Installation « menu to sel-
ect the line » EURO-AV-assignment «.
The menu » EURO-AV-assignment « appears.
GRUNDIG
TEXT-PROGRAMMING
EURO-AV assignments
Inputs:
A 1-Socket
AUTO
CVBS
Y/C
A 2-Socket
AUTO
CVBS
Y/C
Output:
A 1-Socket
CVBS
Y/C
<
> : Select
OK : Confirm
INFO : Return to Info menu
W
Q
Press the
or
button to select lines.
E
R
Press the
or
button to select the desired function.
(In case of signal disturbance, select the setting » CVBS « or
» Y/C «).
The position you selected is underlined in blue. If you store
this position in the memory, it will turn green.
O
Press the
button to store the function in the memory.
The recorder switches back to the TV programme.
D 2-MAC Decoder,
TV sets with the 16:9 format
It is necessary to adapt the input sockets of the recorder if
you have a TV with this format.
Press the
button.
ø
5
Select the line »Installation« with the numeric button
from
the menu » Info «.
3
Select the line » 16:9 Automatic « with the numeric button
from the menu » Installation «.
The menu » 16:9 Automatic « appears.
GRUNDIG
TEXT-PROGRAMMING
16 : 9 Automatic
16:9 Automatic
OFF ON
<
> : Select
OK : Save
INFO : Return to Info menu
E
R
Select the desired function with the
or
button.
The selected position is highlighted in blue. If you store the
position, it is highlighted in green.
O
Press the
button to store the function.
The recorder switches back to the TV programme.
7. Special Functions
Remote Control of other GRUNDIG Video
Recorders
With this remote control you can control different
GRUNDIG video recorders independently of each other.
You can use it with your GV 470 and a second recorder of the
series VS 600 to VS 900 and the GV 200 and later models.
In order to do so, the recorder must be adapted.
1
2
3
4
5
6
7
8
9
0
SAT
SET
EW/ED
OK
AV/CV
VIDEO 1
RE
RECORD
CHECK
CL
TIMER
PROGRAM
ON/OFF
S-VHS
AUTO
TRACKING
DE
V
HIFI
VIDEO 2
LP
COUNT
0000
TV
–
+
AV
PROGRAM
VIDEO 1
RE
RP 47
DE
VIDEO 2
OK
TIP
VPT
INFO
VIDEO 1
STOP
PICTURE
ATS
CODE
PAL/SEC
VIDEO 2
Selecting the video level
When the switch is in the VIDEO 1 position, you can control
your GV 470;
When the switch is in the VIDEO 2 position, you can control
the second recorder.
If the switch 1 VIDEO 2 is not set to the selected video level
when controlling your GV 470, » VIDEO I « or » VI DEO 2 « in
the recorder´s display advises you that you must switch
the remote control to the other video level.
Adapting the second recorder for use with the
remote control
In order to control your GV 470, set the switch to the VIDEO 1
position. An adaption is not necessary in this case.
In order to control the second recorder, it is necessary to
change the command structure.
Set the switch to the VIDEO 1 position.
Disconnect your GV 470 from the mains.
Point the remote control at the second recorder, press the
Z
8 5 1 7
button, the numeric buttons
, and then
O
press the
button.
The second recorder will only respnd if you set the switch to
the VIDEO 2 position.
Reconnect your GV 470 to the mains.
If you wish to undo the adaption, set the switch to the VIDEO 2
Z
8 5 1 6
and press the
button, the numeric buttons
,
O
and the
button consecutively.
Werbung
Inhaltsverzeichnis
