Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Timer Manually - Pioneer PDP-LX608D Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10
Using the Electronic Programme Guide (EPG)(for DTV only)
• Select a programme not yet started (then ENTER or GREEN):
The programme can be set for recording/watching.
3
Select "Yes" in a confirmation dialogue box (/ then
ENTER).
• The Programme Timer screen with a list of other preset
programmes information appears.
Programme Timer
No.
Date
Time
01
Mon.05.Jan
12:00-13:00
02
Every Day
14:00-15:00
03
Every Sun
14:00-15:00
04
Mon-Fri
14:00-15:00
05
Sat, Sun
14:00-15:00
06
07
08
09
10
• You can modify the presettings here (/, / then ENTER).
• You can register the presettings here ( or ENTER).
4
Press RETURN to return to the EPG screen.
• The EPG screen updates with the new presettings.
• A red clock icon appears for the preset programme.
• A yellow triangle icon appears for overlapped presettings.
5
Press EPG to exit the EPG screen.
With the system switched on, a channel switch alarm message
appears approximately 60 seconds before execution and the
channel is switched a short time before the start of the programme.
Note
• Auto channel select is not executed when the system is in the
standby mode.
• Even in the standby mode, preset programmes can be recorded
as only the plasma television alone wakes up and outputs AV
signals when the preset time comes.
• Finish presetting operations three minutes before the start of
the programme.
• For priorities about overlapped presettings, see Priority rules for
overlapped presettings on page 49.
• The TIMER indicator on the front of the plasma television lights
up in orange when a programme is preset for recording/
watching.
48
En
Wed.24.Nov 12:34
Channel
Info
001 ************
007 ***************
007 ***************
007 ***************
007 ***************
• Recording may fail because of watching restrictions imposed by
the CA module.

Setting the timer manually

Using the menu, you can also preset digital TV programmes by
specifying their scheduled date and time.
1
Press HOME MENU.
2
Select "Setup" (/ then ENTER).
3
Select "DTV Setup" (/ then ENTER).
4
Select "Programme Timer" (/ then ENTER).
• The schedule table appears.
Programme Timer
No.
Date
Time
01
- - -. - -. - - -
- - : - - - - - : - -
02
- - -. - -. - - -
- - : - - - - - : - -
03
- - -. - -. - - -
- - : - - - - - : - -
04
- - -. - -. - - -
- - : - - - - - : - -
05
- - -. - -. - - -
- - : - - - - - : - -
06
- - -. - -. - - -
- - : - - - - - : - -
07
- - -. - -. - - -
- - : - - - - - : - -
08
- - -. - -. - - -
- - : - - - - - : - -
09
- - -. - -. - - -
- - : - - - - - : - -
10
- - -. - -. - - -
- - : - - - - - : - -
Select a programme number (/ then ).
5
• You can select any desired programme number.
Specify a date (/ or 0 to 9, then ).
6
7
Specify the start hour/minute and end hour/minute
(/ or 0 to 9, then ).
Specify a channel number (/ or 0 to 9, then ).
8
Programme Timer
No.
Date
Time
01
Mon.05.Jan
12:00-13:00
02
- - -. - -. - - -
- - : - - - - - : - -
03
- - -. - -. - - -
- - : - - - - - : - -
04
- - -. - -. - - -
- - : - - - - - : - -
05
- - -. - -. - - -
- - : - - - - - : - -
06
- - -. - -. - - -
- - : - - - - - : - -
07
- - -. - -. - - -
- - : - - - - - : - -
08
- - -. - -. - - -
- - : - - - - - : - -
09
- - -. - -. - - -
- - : - - - - - : - -
10
- - -. - -. - - -
- - : - - - - - : - -
9
Register the preset settings after all items are set (ENTER).
• If a preset time is in the past or the channel is locked, an alert
message appears.
• A yellow triangle icon indicates that the recording/watching
may fail due to overlapped presettings.
• If presetting another programme, repeat steps 5 to 9.
• You can preset up to 10 programmes.
10 Press HOME MENU to exit the menu.
Wed.24.Nov 12:34
Channel
Info
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
Wed.24.Nov 12:34
Channel
Info
001 ************
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - -

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pdp-lx6080dPdp-lx5080dPdp-lx508d

Inhaltsverzeichnis