Gearchange Pedal Adjustment - Ducati SBK749R 2005 Anleitung- Und Instandhaltungsheft

Gearchange pedal adjustment (fig. 26)
Gear change pedal position relative to the footpeg may be
adjusted to suit rider preferences.
There are three different adjustments available:
Approximate adjustment of pedal position
2
Fit a wrench into the socket (1) to lock out removable
E
linkage rotation and slacken the locknut (3). Release
and remove the screw (2) and adjust the linkage axially
so as to set the gear change pedal in the desired position.
The linkage has four positions determined by the axis of
the screw (2). After adjustment, torque screw (2) to 8 Nm 1 3
and locknut (3) to 10 Nm.
fig. 26
Fine adjustment
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Rotate the
linkage working the socket (1) so as to set pedal in the
desired position. When finished, torque locknut (3) to
10 Nm.
Combined adjustment
Both adjustment techniques may be used together.
Make sure to torque locknut (3) to 10 Nm and screw (2)
to 8 Nm when finished.
33