Gearchange Pedal Adjustment - Ducati 999R 2004 Anleitung- Und Instandhaltungsheft

Gearchange pedal adjustment (fig. 26)
Gear change pedal position relative to the footpeg may be
adjusted to suit rider preferences.
There are three different adjustments available:
Approximate adjustment of pedal position
2
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Release and
remove the screw (2) and adjust the linkage axially so as to
E
set the gear change pedal in the desired position.
The linkage has four positions determined by the axis of
the screw (2). When finished, tighten the screw (2) and
1 3
the locknut (3).
fig. 26
Fine adjustment
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Rotate the
linkage working the socket (1) so as to set pedal in the
desired position. When finished, tighten the locknut (3).
Combined adjustment
Both adjustment techniques may be used together.
Make sure to tighten locknut (3) and screw (2) when
finished.
32