Seat/Fuel Tank Adjustment - Ducati SBK749R 2005 Anleitung- Und Instandhaltungsheft

Seat/fuel tank adjustment

The complete seat-fuel tank-tail guard assembly can
be adjusted by sliding forward and rearward along rear
subframe (1) axis.
This provides a 20-mm adjustment range for the seat (2)
to meet rider's preferences.
Adjust as follows:
Release and remove the side screws (3) and remove
the side grab handles (4).
Slacken the screws (5) and move the seat-fuel tank
assembly forward or rearward.
The three holes (6) in the subframe (1) allow three different
positions.
Match the seat hole with the subframe hole that
determines the desired seat position.
When finished, torque the screws (5) to 10 Nm.
A stud (7) fixed in the centre of the tail guard slides in
a slot (8) fitted with an "H" rubber (9).
Position the side grab handles and tighten the side
screws (3) to 10 Nm.
2
6 1
fig. 30
7
9
8
5
4
3
fig. 31
37
E