Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Self-adhesive Capacitive Sensor Head BCW F03EA...
3.3
Installer qualification
Installation and startup may only be performed
by trained specialists with basic electrical
knowledge.
Qualified personnel are those who can recognize
possible hazards and institute the appropriate
safety measures due to their professional training,
knowledge, and experience as well as their
understanding of the relevant safety regulations
pertaining to the work to be done.
The operator is responsible for ensuring that
safety regulations are observed. In particular, the
operator must take steps to ensure that a defect
in the device will not result in hazards to persons
or equipment.
4
Product description
Sensor head (BCW F03EA...) for non-contact
and continual level detection of media through
vessel or pipe walls made of plastic or glass.
• Active detection area max. 850 mm
• Can be trimmed as needed (min. 108 mm)
• Attached using integral adhesive surface
• Measurement value is output from a separate
BAE sensor amplifier (not included), optionally
as an analog signal 0...10 V, 4...20 mA or as a
data value via IO-Link.
• Limit value setting via separate BAE sensor
amplifier
Order code
Output configuration
BAE00KJ
Analog cable 2 m
BAE00LA
Analog pigtail M12
BAE00LC
IO-Link pigtail M12
4
english
1
Vessel wall
2
Adhesive electrode
3
Electronics box
4
BAE sensor amplifier
NOTE
The Device Description file for IO-Link (IODD,
IO Device Description) as well as additional infor-
mation about the BAE sensor amplifier and
sensor head can be found at www.balluff.com.
Werbung
Inhaltsverzeichnis
