Hama 00012089 Bedienungsanleitung Seite 31

Combination devices with two device codes
Some combination devices (for example a
TV with video recorder) require separate
device codes for each device component.
Program the correct TV code to the TV source
button and the code for the video recorder
to a different source button. You then control
the combination device like two separate
devices.
Combination devices with one device code
Other combination devices require only one
code. Here you must first select the device
component which you want to operate.
Example: The device is a combination DVD
recorder/video recorder. The device code is
programmed to the DVD source button.
Now you control the DVD part of the
combination device by pressing and holding
the DVD source button for longer than one
second.
To control the video recorder in the
combination device, first briefly press the
Setup button for the SHIFT function, then the
DVD source button.
If your combination device requires only one
device code but you wish to operate the two
device components with two source buttons,
proceed as follows:
Program the device code to two source
buttons.
Operate one of the device components using
either of the two source keys.
Use the learn function to transfer the required
functions of the other device component to
the other source button.
29