Making A Call; Handsfree; Internal Calls (Intercom Function); Connecting External Calls To The Other Handset - AUDIOLINE DECT 8048 -SOS Bedienungsanleitung

While the handset/alarm unit is ringing, the
Note:
To end the call, replace the handset in the base station or press the Call button
Information on the display of the phone numbers is provided in Chapter 6.
Note:
4.3

Making a call

1. Enter the phone number to be called, with max. 32 digits, using the digit keypad. Since the display can only
show a maximum of 12 digits, only the last 12 digits are displayed in the case of longer phone numbers.
If you have entered a wrong digit, press the
Note:
the entire phone number.
2. Press the Call button
It is also possible to press the Call button
Note:
required. The telephone dials the number directly. However, individual digits cannot be deleted and
corrected when using this method of dialling phone numbers.
4.4

Handsfree

Press the Handsfree button
loudspeaker on the handset.
By pressing the Handsfree button
during a call.
Always end the call being carried out using the handsfree function by pressing the Call button
4.5

Internal calls (intercom function)

As soon a second handset or alarm unit is registered on a base station, they can be used free of charge for internal
calls.
I
To do this, press the
pressing the Call button
If the other handset is being used for an external call, the control lamp on the receiver lights up on all the
Note:
handsets. It is not possible to carry out a second external call.
4.6

Connecting external calls to the other handset

If you have taken an external call on a handset, the call can be transferred to the other handset or alarm unit. To do
I
this, press the button and then the internal number (1 or 2) of the required handset/alarm unit.
If the handset called does not answer, take the call back by pressing the
52
C
and the required connection is established.
b
before dialling or during a call. You then hear the dialling tone or the caller via the
b
as necessary, it is possible to switch between normal and handsfree operation
button and then the internal number, 1 or 2, of the required handset. The call is taken by
C
on the receiving handset.
- Operation -
D E
and buttons can be used to change the ringing volume.
A
button to delete it. Press and hold the
C
first to obtain the dialling tone. Enter the phone number
I
C
.
A
button to delete
C
.
button.