Advanced Functions; Setting The Ringing Melody On The Handset; Setting The Ringing Tone Volume On The Handset - AUDIOLINE DECT 8048 -SOS Bedienungsanleitung

8

Advanced Functions

All the other programming functions can be accessed by means of a user friendly menu. A general reference list is
provided below explaining how to navigate in the menu:
B
Press the button to start the programming function. The
D E
Press the and buttons to select the required level.
B
Press the button to open the required level.
D E
Use the and buttons to move to and select the required function, confirm selection bypressing the Menu
B
button .
F
Press the button to move one level back.
Every programming process is automatically cancelled if there is no input within 15 seconds.
F
Press and hold the
accepted.
A complete overview of the menus is provided in Section 8.15.
8.1

Setting the ringing melody on the handset

There are three different ringing melodies available for selection on the handset with which the handset rings when a
call is received. If the telephone system operates with more than one handset, you can set different ringing melodies
for external and internal calls.
1. Press the Menu button
D E
2. Use and
D E
3. Use and
calls/only with two handsets) and confirm by pressing
D E
4. Use and
5. You can now select other menu functions or press
8.2

Setting the ringing tone volume on the handset

The volume of the ringing tone on the handset can be set to one of three levels. If you do not want to be disturbed,
you can switch the ringing tone off completely. If the ringing tone is switched off, incoming calls are indicated by the
base station and in the handset display.
1. Press the Menu button
D E
2. Use and
62
- Advanced Functions -
button to exit from the programming function at any time without any modifications being
B
.
to select the HANDSET menu and confirm by pressing
to select EXT MELODY (ring tone for external calls) or INT MELODY (ring tone for internal
to select the required melody and confirm by pressing
B
.
to select the HANDSET menu and confirm by pressing
j
icon lights up in the display during programming.
B
.
B
.
B
.
F
to exit from the menu.
B
.