Settings - AUDIOLINE DECT 8048 -SOS Bedienungsanleitung

C
Changing the volume
no
Press to adjust the volume during a call.
D Trigger alarm (also refer to R)
q
Press to dial the phone number of the special
services exchange. The special services exchange
notifies listed persons or sends one of the services to
provide help, as necessary.
9.2

Settings

The alarm unit can assign different ringing melodies to the various phone numbers (contact person, service
exchange, self-test and low battery warning). This means you know who is calling simply from the ringing melody.
E
Adjusting the ringing melody and volume
q
Press and hold
q
Press again.
The current melody is played.
no
Press to select one of the five melodies.
q
Press to change the volume setting.
no
Press to set the volume.
p
Press and hold
F
Setting the melody for the contact person
q
Press and hold
q
Press again 3 times.
no
Press to select one of the five melodies.
p
Press and hold
G
Setting the melody for the services exchange
q
Press and hold
q
Press again 4 times.
no
Press to select one of the five melodies.
p
Press and hold
- Alarm Unit -
until the red LED lights up.
to save the setting.
until the red LED lights up.
to save the setting.
until the red LED lights up.
to save the setting.
Result:
This melody rings when a call is received from any
number.
An acoustic acknowledgement signal is issued.
Result:
This melody rings when the contact person calls.
Result:
This melody rings when the exchange calls.
An acoustic acknowledgement signal is issued.
71