Disposal; Technical Specifications - Sanitas SBM 22 Gebrauchsanweisung

11. Disposal

Repairing and disposing of the device
• Do not repair or adjust the device yourself. Proper opera-
tion can no longer be guaranteed in this case.
• Do not open the device. Failure to comply will invalidate
the warranty.
• Repairs must only be carried out by Customer Services or
authorised retailers. Before making a claim, please check
the batteries first and replace them if necessary.
• For environmental reasons, do not dispose of the
device in household waste at the end of its service
life. Dispose of the device at a suitable local
collection or recycling point in your country. Dispose of
the device in accordance with EC Directive – WEEE
(Waste Electrical and Electronic Equipment). If you have
any questions, please contact the local authorities
responsible for waste disposal.
Disposing of the batteries
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.

12. Technical specifications

Model No. SBM 22
Measurement Oscillometric, non-invasive blood pres-
method sure measurement on the upper arm
Measurement Cuff pressure 0-300 mmHg,
range Systolic 50-280 mmHg,
Diastolic 30-200 mmHg,
Pulse 40-199 beats/minute
Display accuracy Systolic ± 3 mmHg, Diastolic ± 3 mmHg,
Pulse ± 5% of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
Systolic 8 mmHg /
Diastolic 8 mmHg
Memory 4 x 30 memory spaces
Dimensions L 134 mm x W 103 mm x H 60 mm
Weight Approximately 367 g (without
batteries, with cuff)
37