Herunterladen Inhalt Inhalt Diese Seite drucken

Leistungserklärung - Grundfos PS.W.04 Montage- Und Betriebsanleitung

Inhaltsverzeichnis

Werbung

Leistungserklärung
GB:
EC declaration of performance in accordance with Annex III
of Regulation (EU) No 305/2011
(Construction Product Regulation)
1. Unique identification code of the product type:
– EN 12050-1 or EN 12050-2.
2. Type, batch or serial number or any other element allowing
identification of the construction product as required pursuant to
Article 11(4):
– PS.W. pumping stations marked with EN 12050-1 or EN 12050-2 on
the nameplate.
3. Intended use or uses of the construction product, in accordance with
the applicable harmonised technical specification, as foreseen by the
manufacturer:
– Pumping stations for pumping of wastewater containing faecal
matter marked with EN 12050-1 on the nameplate.
– Pumping stations for pumping of faecal-free wastewater marked
with EN 12050-2 on the nameplate.
4. Name, registered trade name or registered trade mark and contact
address of the manufacturer as required pursuant to Article 11(5):
– Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro
Denmark.
5. NOT RELEVANT.
6. System or systems of assessment and verification of constancy of
performance of the construction product as set out in Annex V:
– System 3.
7. In case of the declaration of performance concerning a construction
product covered by a harmonised standard:
– TÜV Rheinland LGA Products GmbH, identification number: 0197.
Performed test according to EN 12050-1 or EN 12050-2 under
system 3.
(description of the third party tasks as set out in Annex V)
– LGA test report No. 60339141-002.
8. NOT RELEVANT.
9. Declared performance:
The products covered by this declaration of performance are in
compliance with the essential characteristics and the performance
requirements as described in the following:
– Standards used: EN 12050-1:2001 or EN 12050-2:2000.
10. The performance of the product identified in points 1 and 2 is in
conformity with the declared performance in point 9.
CZ:
Prohlášení o vlastnostech EU v souladu s Dodatkem III
předpisu (EU) č. 305/2011
(Předpis pro stavební výrobky)
1. Jedinečný identifikační kód typu výrobku:
– EN 12050-1 nebo EN 12050-2.
2. Typ, dávka nebo výrobní číslo nebo jakýkoliv prvek umožňující
identifikaci stavebního výrobku podle požadavku Článku 11(4):
– Čerpací stanice odpadních vod PS.W. s označením EN 12050-1
nebo EN 12050-2 na typovém štítku.
3. Zamýšlená použití stavebního výrobku v souladu s příslušnou
harmonizovanou technickou specifikací výrobce:
– Čerpací stanice odpadních vod s fekáliemi s označením EN 12050-
1 na typovém štítku.
– Čerpací stanice odpadních vod bez fekálií s označením EN 12050-2
na typovém štítku.
4. Název, registrovaný obchodní název nebo registrovaná ochranná
známka a kontaktní adresa výrobce podle požadavku Článku 11(5):
– Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro
Dánsko.
5. NESOUVISÍ.
6. Systém nebo systémy posuzování a ověřování stálosti vlastností
stavebního výrobku podle ustanovení Dodatku V:
– Systém 3.
7. V případě prohlášení o vlastnostech stavebního výrobku zahrnutého
v harmonizované normě:
– TÜV Rheinland LGA Products GmbH, identifikační číslo: 0197.
Proveden test podle EN 12050-1 nebo EN 12050-2 v systému 3.
(popis úkolů třetí strany podle ustanovení Dodatku V)
– Číslo certifikátu: Certifikát LGA č. 60339141-002. Typ testován a
monitorován.
8. NESOUVISÍ.
9. Prohlašované vlastnosti:
Výrobky uvedené v tomto Prohlášení o vlastnostech jsou v souladu
se základními charakteristikami a požadavky na vlastnosti, jak je
popsáno níže:
– Použité normy: EN 12050-1:2001 nebo EN 12050-2:2000 .
10. Vlastnosti výrobku uvedeného v bodech 1 a 2 v souladu s
prohlašovanými vlastnostmi v bodě 9.
3
23

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ps.w.10Ps.w.20

Inhaltsverzeichnis