Thermostat And Operation; Temperature Control; Operation Parameters - Pkm KS 82.3A+ UB Bedienungsanleitung

1. The thermostat controls the temperature inside your appliance. The thermostat
is switched off when it is set to position 0/AUS/OFF.
2. Turn the knob to position 3 ( normal operating-temperature ) as soon as you
have switched on the appliance. After approx. 5 hours the appliance has reached
its normal operating-temperature. Your new appliance is ready to operate now.
3. If you want to set a warmer temperature, turn the knob from position 3 to
position 2 or lower.
4. In case of high ambient temperatures ( e.g. hot summer days ): turn the knob
from position 3 to position 4 or higher to set a lower temperature.
5. If you choose a low temperature and some rime is generated at the backside of
the appliance, we recommend to choose a higher temperature.
6. When you open the door of the cooling-compartment, the internal light is
switched on. When you close the door, the internal light is switched off.
If you have disconnected the appliance from the energy supply, wait 3-5
minutes before you restart the appliance. Otherwise the appliance can be
damaged.
The setting definitions are standard values only.
1. The appliance can only reach the relevant temperatures when:
Downloaded from www.Manualslib.com

7. THERMOSTAT AND OPERATION

After having installed the appliance wait 4 hours before you
connect it to the mains.

Operation parameters

a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
manuals search engine

Temperature control

32