Temperature Control; Operation Parameters - Pkm GS 101.4A+N EB Bedienungsanleitung

4
AFTER INSTALLATION WAIT 4-6 HOURS
BEFORE YOU CONNECT YOUR APPLIANCE TO THE MAINS!

Temperature control

OFF/AUS Off.
MIN Lowest (= warmest) cooling temperature.
MED Normal operation; suitable for the most operation conditions.
MAX Highest (= coldest) cooling temperature.
1. When you operate the appliance for the first time:
2. Set the thermostat to MED.
3. Wait approx. 24 hours before you store food in the appliance; so the appliance
can reach its set cooling temperature.
4. The setting OFF switches off the compressor only. You must unplug the
appliance to disconnect it from the mains.
5. When the appliance has been disconnected from the mains or switched off or in
case of a power failure, you must wait 3 to 5 minutes before restarting the
appliance.
6. The description of the setting levels represents standard values only.

Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. 4**** appliances freeze food at a temperature of -18
temperature is affected by the room temperature, site and frequency of door
operation.
3. The freezing temperature should not be warmer than -18
4. You can check the freezing temperature with a commercial available freezer-
5
thermometer .
5
Not included in delivery.
OPERATION
32
0
C or lower. The freezing
0
C.
4