Thermostat And Operation; Temperature Control; Operation Parameters - Pkm KG 209.4 A++ Bedienungsanleitung

7. THERMOSTAT AND OPERATION

A
FTER HAVING INSTALLED THE APPLIANCE WAIT
A
FTER HAVING INSTALLED THE APPLIANCE WAIT
THE FREEZER COMPARTMENT FOR THE FIRST TIME
Off (compressor only; appliance is still connected to the mains)
1. When you operate the appliance for the first time, set the thermostat to
position 3, put the plug into the socket and let the empty appliance operate for
2 to 3 hours.
2. Select your desired setting. You can store food in the appliance now.
3. Select your desired setting by turning the thermostat dial. The positions 2 ~ 3
are most suitable for normal daily use.
4. If you choose a low temperature and some rime is generated at the back of the
appliance, we recommend you select a higher temperature.
5. Adept the temperature setting to the outdoor temperature.
6. NOTICE! When the thermostat has been turned clockwise to '7'position, do
not attempt to turn it more over. Otherwise it will be damaged.
7. If you have disconnected the appliance from the energy supply, wait 5 minutes
before you restart the appliance. Otherwise the appliance can be damaged.
The setting definitions are standard values only.
1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. Do not store warm or hot food in the appliance.

Temperature control

CONNECT IT TO THE MAINS
Setting
lowest/warmest
Normal
Higher/colder

Operation parameters

34
4
HOURS BEFORE YOU
.
24
HOURS BEFORE YOU USE
!
Position
Position 1
Position 2~3
Position x > 3
0