Tens-Chronic Pain And Acute Pain - Beurer EM 70 Gebrauchsanleitung

Step 3 – Placing the Electrode pads
Remove the clear plastic film from the back of the pad.
Place the device on clean, dry and healthy skin, near or surrounding
the area with pain.
NOTE:
Replace the electrodes when they are damaged or dirty, when they
have lost their adhesive power or when stimulation becomes un-
comfortable, i.e. when you experience an unpleasant stinging or
biting sensation.
WARNING
Always connect the device before you place the electrodes on the
skin. It is possible that you may need external assistance for placing
the electrodes in certain areas.
Replace the electrodes if:
• they are damaged or torn.
• they are past the use-by date indicated on the re-sealable bag.
• they have lost their adhesive power. Never use plaster or tape to
attach them to your skin.
• stimulation feels less strong.
• when stimulation is uncomfortable, i.e. when you experience an
unpleasant stinging or biting sensation.
NOTE
Always replace the electrodes with electrodes recommended for this
device by the manufacturer.
WARNING
• Make sure the device is turned off before applying electrodes.
WARNING
• Place the electrode pads according to the electrode Pad place-
ment illustrations.

9.2 TENS-Chronic Pain and Acute pain

NOTE
To treat areas of shoulder, back, please use large size electrode.
Arm
Body
Back
Joint
30