Cleaning And Maintenance - Beko HNS61210W Handbuch

4

Cleaning and maintenance

Prior to cleaning and maintenance, unplug the
appliance or turn the main swich off or loosen the
fuse that supplies the hood.
Failure to comply with the provi-
1
sions relating to cleaning of the
device and replacement of filters
A
may cause fire risks. It is therefore
recommended to comply with the
guidelines given herein. The manu-
facturer is not liable for any damage
to the engine or fires caused by im-
proper use.
Clean using only a cloth dampened with neutral
liquid detergent. Do not clean with tools or instru-
ments. Do not use abrasive products. Do not use
alcohol
4.1 Cleaning of Aluminium
Grease Filter
2
This filter captures oil particles in the air. You are
recommended to clean your filter every month
under normal usage conditions. First remove the
grease filters for this process. Wash the filters
with liquid detergent and rinse them with water
and install them back after they get dry. Alumin-
ium grease filters may get discolered as they
are washed; this is normal and you don't need to
change your filter.
C
You can wash the Aluminium filter
in the dishwasher
Hood / User Manual
4.2 Changing of Carbon Filter
(Air Circulation Mode)
The hood can be fitted with an active carbon filter.
The carbon filter is applied only in case the hood is
not connected to the vent duct. 3
In any case it is necessary to replace the carbon
filter at least every three months.
1x A
ø 100 mm
ø 120 mm
4
A
WARNING: The carbon filter is
never washed.
WARNING: Carbon filter is avail-
able from Authorized Services.
11 / EN