Using The Hood; Maintenance And Cleaning; General Cleaning Information; Aluminium Filter - Beko BHCB91622BXH Bedienungsanleitung

4 Using the Hood

The hood has an engine with various
speeds. For a good performance, we re-
commend using low speeds under normal
conditions and high speeds in case of
strong odour and vapour condensation.
MODEL A
1 Off button
2 Speed 1 button
3 Speed 2 button
4 Speed 3 button
5 Lamp button

5 Maintenance and Cleaning

5.1 General Cleaning Information

General warnings
• Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
• Disconnect the product from the elec-
trical connection before starting mainten-
ance and cleaning operations. There is
an electric shock hazard!
• Some detergents or cleaning agents may
cause damage to the surface. Do not use
abrasive detergents, cleaning powders,
cleaning creams or sharp objects during
cleaning.
• Do not use steam cleaning products for
cleaning.
Product cleaning
• The product should be thoroughly
cleaned after each use. Thus, food
residues are easily cleaned and these
residues are prevented from burning
when the product is used again later.
Operating the hood
1. Press the speed level button you have
selected to operate the hood.
ð The hood starts to operate in the
adjusted speed level.
2. You can press the other speed level but-
tons to change the speed level.
Turning off the hood
1. When your hood is operated at any level,
press the off button.
Operating the lamp
1. Press the button to operate the lamp.
ð Hood lamp lights.
Turning off the lamp
1. You can turn off the hood lamp by
pressing the button again.
• No special cleaning agent is required for
cleaning the product. Clean the product
using dishwashing detergent, warm wa-
ter and a soft cloth or sponge and dry it
with a dry cloth.
• Do not use acid or chlorine-containing
cleaning agents to clean stainless or inox
surfaces and handles. Clean with a soft
soapy cloth and liquid (non-scratching)
detergent, taking care to wipe in one dir-
ection.
• There are sensors in the backside of the
product's glass cover. Do not damage
these sensors during cleaning. (For
model C)

5.2 Aluminium Filter

This filter serves to retain oil particles in the
air. It is recommended to clean the filter
once a month under normal usage. To
achieve this:
1. Remove the aluminium filters.
2. Wash the filters in water using liquid de-
tergent and reinstall after drying.
EN / 13
EN
DE
FR
NL