AsViva T23 Benutzerhandbuch Seite 58

COMPUTER
4) „PROGRAM":
press this key to choose suitable program. The programs are: P1(MANUAL), P2 (INTERVAL), P3 (LO-
SEWEIGHT), P4 (WALK), P5 , P6, P7, P8, P9, P10, P11, P12 and FAT. In climb mode you can choose
P1-P6.
5) QUICK PROGRAM BUTTONS:
You can chose P1(MANUAL),P2(INTERVAL),P3(LOSE WEIGHT),P4(WALK),P5 (RUN) and P6
(CLIMB) directly by quick program button "MANUAL" "INTERVAL" "LOSE WEIGHT" "WALK" "RUN"
"CLIMB".
6) „RUN":
in standby mode, press this key and then the treadmill will enter into RUN mode. It is invalid in climb
mode.
7) „CLIMB":
in standby mode, press this key and then the treadmill will enter into CLIMB mode. It is invalid in run-
ning mode.
8) „-SPEED+ „:
In setting mode it can change the target data and in normal working mode it can change the speed
by 0.1km/h per time. When you press "-SPEED+" key lasting for 0.5 sec the speed data will change
continuously.
9) „-INCLINE + „:
In setting mode it can change the target data and in normal working mode it can change the incline by
0.5 section per time. When you press "-INCLINE+" key lasting for 0.5 sec the incline data will change
continuously.
10) „SPEED 6 8 10":
Speed quick buttons, press to choose speed 6, 8 and 10 directly.
11) „INCLINE 3/10, 5/20, 7/30":
Incline quick buttons, press to choose incline section 3, 5 and 7 directly in RUN mode, and in CLIMB
mode, press the keys it will change to 10,20,30.
58