Adding Distances Together; Measuring Areas; Adding Areas Together - Powerfix Profi Plus PMDL 5 A1 Bedienungsanleitung

Adding distances together

You can add the measured distances together:
1.
2.
3.
4.
5.
6.

Measuring areas

1.
2.
3.
4.

Adding areas together

1.
2.
3.
4.
5.
6.
7.
8.
9.
Downloaded from www.Manualslib.com
Measure the first distance as described.
r
Press the button +/= . In the display
measured carries itself over to the lower line.
Measure the next distance. The newly measured distance is shown in the
upper line.
Once again, press the button +/=
to the old measurement in the lower line.
Repeat steps 2 to 4 to add further measurements.
When you wish to leave the addition mode, press the button MODE
All values are erased.
Slide the function switch
2
The display switches itself on.
4
Press the button MODE
6
Press the button READ
the measured length appears and „W" (Width) starts to flash.
6
Press the button READ
appears on the upper line and the result of the area calculation in the
lower line.
Measure an area as described in the section „Measuring areas".
7
Press the button M . „M+" appears in the display
The area measured is now saved.
4
Press the button MODE
measurement.
Measure the next area.
r
Press the button +/= . A „+" appears in the display
w
Press the button RM . The result of the first measurement is shown in the
lower line.
r
Press the button +/= . Both measurements are added together and
the result is shown in the lower line.
Repeat the steps 2 to 7 to add in further measurement values.
When you wish to leave the addition mode, press the button MODE
All values are erased.
manuals search engine
2
, „+" appears and the distance
r
. The new measurement is added
q
to „DISTANCE".
2
once. In the display
, to measure the length. In the upper line
to measure the width. The measured width
. The appliance is now ready for the second
- 43 -
4
.
flashes „L" (Length).
2
.
2
.
4
.