Preparing For Use; Inserting / Replacing The Battery; Use; Measuring Distances - Powerfix Profi HG02404 Bedienungs- Und Sicherheitshinweise

Preparing for use

Inserting / replacing the
battery
Note: Remove the foil from battery be-
fore inserting into battery compartment
Open the battery compartment
on the back of the product.
Remove the spent battery, if necessary.
Insert a new 9 V block battery into the
battery compartment. Check the po-
larity of the battery during insertion!
Ensure that the band for easy removal
of the battery lies under the 9 V block
battery. Press the battery firmly into
battery compartment.
Close the battery compartment again.
The battery compartment lid locks
noticeably and audibly into place.
Note: When the battery symbol
appears in the display
battery. With a weak battery you may re-
ceive an inaccurate or false measurement
result.

Use

Measuring distances

1. Slide the function switch
position „DISTANCE". The display
is turned on.
2
2. Hold the product horizontally to the
wall at the distance you wish to measure.
16 GB/IE/NI
, replace the
2
to the
9
.
13
13