Pioneer PDP-V402E Bedienungsanleitung Seite 20

HOW TO ADJUST PICTURE QUALITY
COMMENT REGLER LA QUALITE DE L'IMAGE
EINSTELLEN DER BILDQUALITÄT
Remote control
Commande à distance
Fernbedienung
P I CTURE PARAMETER
Main unit
Unité principale
Hauptgerät
ADJUST
Remote control
Commande à distance
Fernbedienung
SET
P I CTURE PARAMETER
CONTRAST
BR I GHT.
CLK. FRQ.
Main unit
CLK. PHS.
Unité principale HOR. POS.
VER. POS.
Hauptgerät
I N I T.
SET
SCART RGB
Remote control
Commande à distance
Fernbedienung
• Return to the normal
MENU
screen.
• Ë Retour à l'écran normal.
• Zurück
Main unit
Unité principale
Maske.
Hauptgerät
MENU
20
<ARE1348>
En/Fr/Ge
SCART RGB ON
OFF
: CHANGE SET : SET
+ 1 0
– 5
– 0
+ 8
ON
SET : SEL. MENU : EXIT
zur normalen
Select SCART RGB ON.
Press the SET button.
When setting is completed, return to
the normal screen.
NOTE:
With the function set to RGB-1, when inputting RGB
output from a unit with a Euro AV (SCART) terminal,
always set SCART RGB to ON.
With the function set to RGB-1, when inputting RGB
output from a unit with a Euro AV (SCART) terminal,
always set SCART RGB to ON, and set the Sync Sig-
nal Input Impedance switch ( 0 on page 8) to 75 Ω .
When inputting a signal other than RGB output, al-
ways set SCART RGB to OFF.
Before you perform the above settings, always first
turn OFF the power to the unit connected to RGB-1. If
you perform the above settings with the power to
the unit connected to RGB-1 remaining ON, in some
cases there may be nothing on the screen or remote
control operation will be ineffective.
If this occurs, turn OFF both the main unit
and the power to the unit connected to RGB-1, then
perform resetting.
button