Milk Beverages  Cleaning Cycle: Clean - Saeco Kuhlkaraffe Bedienungsanleitung

MILK BEVERAGES  CLEANING CYCLE: CLEAN
10
PRODUCT BREWING
AT THE BEGINNING OF THE DISPENSING PHASE, THE MACHINE MAY PRODUCE SOME SPURTS OF MILK AND
STEAM: RISK OF SCALDING! ALWAYS WAIT FOR THE CYCLE TO END BEFORE REMOVING THE CONTAINER.
To brew products, please refer to the machine manual. This section shows how to position the container to use the thermal carafe.
1
Place the cup or the container where the
milk-based product will be prepared.
CLEANING CYCLE: CLEAN
The machine allows executing a quick cleaning cycle at any time. The cleaning cycle can be executed before and/or after brewing
the beverage. This option allows you to manage the milk container cleaning process as desired. The cleaning process may be used also
for circuit sanitization after a long period of inactivity.
1
Place the container as described on page
8 or 9. The cleaning cycle only involves
the lines in contact with the milk and
it is carried out independently of the
presence of milk in the container.
To correctly insert/remove the carafe, please see the instructions given on page 8 or page 9 according to the fi tting
installed. For simplicity, the photographs and diagrams refer to a compatible model.
2
Rotate the handle upper part of the
container on the cup. To avoid spilling
milk, always use cups of adequate size.
2
Press the button. The machine executes
an additional cleaning cycle.
For compatible models, please see the notes included in the packaging.
3
Choose the product by pressing the
instructions given in the manual.
3
At the end it is possible to remove the
container now ready for use.