Silvercrest SPDCC A1 Bedienungs- Und Sicherheitshinweise Seite 28

Connect your external devices that
should be charged with the product
by plugging its USB plug into the
USB port Type C, PD3.0
port Type A
charged is equipped with the Power
Delivery 3.0 technology, use USB port
Type C, PD 3.0
CAUTION!
If the control lamp
connecting with your external devices.
This indicate that the product is in
overload or fault condition. Please
unplug your external devices from the
product immediately.
IMPORTANT! You can leave
the motor on or off when using the
product. Be aware that the battery
of car might become low because
the product still consumes power
when the motor is off. Disconnect the
product completely from the power
supply if you are not intended to
charge your external devices.
GB/IE 28
. If the device to be
2
.
1
3
or USB
1
lights off while