Error Indicators - hanseatic HGVI6082D14J7713GS Gebrauchsanleitung

Error indicators

Code
:
E1
It takes too long for the
water to fill up.
:
E3
The heating element is
defective.
:
E4
Water overflow
:
Ec
Fault in the washing
control system
Solution
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked
(see „Connecting the inlet hose" on page EN-29).
Ensure that the water pressure is correct. See „Technical specifi-
cations" on page EN-40.
Have the appliance examined and repaired.
Switch off the tap. Find the gap in the seal (or have someone find it)
and repair the leak (or have it repaired).
Have the appliance examined and repaired.
Troubleshooting table
Page EN-37