Cleaning; Maintenance - Marzhauser Sensotech SensorReady 3D Betriebsanleitung

Cleaning

7 Cleaning
WARNING
Danger to life and possible device damage due to impro-
per cleaning.
Disconnect the power supply of the SensorReady 3D from the
mains before starting cleaning work. Ensure that no liquids
enter the interior of the SensorReady 3D or power supply.
Protect the connections/ports and control elements of the
SensorReady 3D from liquids. Never touch the power supply
and socket if your hands are damp or wet.
Danger to life through the spread of substances which
are harmful to health.
In the case of possible contamination with corrosive, infectious,
radioactive or other substance which is harmful to health, have
the SensorReady 3D professionally disinfected/decontaminated.
X
1 Disconnect the SensorReady 3D from the mains.
2 Clean the SensorReady 3D with a lint-free cloth. With grea-
3 Allow the SensorReady 3D to dry.
4 Connect the SensorReady 3D to the mains.
The SensorReady 3D is now ready to use again.
8

Maintenance

The SensorReady 3D is maintenance-free.
88
Cleaning SensorReady 3D
ter contamination, slightly dampen the cleaning cloth with
water or a mild solvent-free disinfectant/cleaning agent.
Operating Manual