Product Description; Identification; Area Of Application - Marzhauser Sensotech SensorReady 3D Betriebsanleitung

Product Description

3 Product Description

3.1 Identification

You can find all required information for clear identification
of the SensorReady 3D on the nameplate. The nameplate is
attached to the back of the SensorReady 3D.

3.2 Area of Application

The SensorReady 3D is used for signal evaluation during the
measurement of objects by means of positioning systems such
as manual measuring stages or Z-axes which are equipped with
measuring systems.
Using the integrated position correction, systematic length
errors of the positioning system can be corrected. Evaluating
reference signals creates an absolute reference of the position
correction values to the machine zero point.
Operation of the SensorReady 3D takes place via a USB in-
terface on a PC. Evaluation via the PC is carried out with the
GetPos software or directly by using the instruction set. The
SensorReady 3D can also be programmed using the instruction
set.
The SensorReady 3D is compatible with all positioning systems
from Märzhäuser Wetzlar that have integrated measuring
systems.
Here you can find further information on the magnetic measu-
ring system from Märzhäuser Sensotech:
»
64
www.marzhauser-st.com
Operating Manual