Operation Via Instruction Set - Marzhauser Sensotech SensorReady 3D Betriebsanleitung

SensorReady 3D
1 To open a saved position table, click the button
2 Follow the on-screen instructions.
As soon as the position table is visible, you can add additional
position values and save the file under a new name or as a
different file format.

6.2 Operation via Instruction Set

Using the instruction set, you can read out position values and
configure all settings on the SensorReady 3D via the USB inter-
face of the SensorReady 3D.
You will find the SensorReady 3D instruction set in PDF format
on the installation CD:
»
Communication between the SensorReady 3D and the PC takes
place using ASCII instructions:
•
•
•
To read out and program the SensorReady 3D using the instruc-
tion set, the SensorReady 3D and PC must be correctly connec-
ted and configured.
»
symbol bar or select the item Open... in the File menu in the
menu bar.
SensorReady 3D Instruction Set
The entries can be in lower or upper case.
Instructions are completed with CR (carriage return, ASCII:
013 ).
dec
Return values of the SensorReady 3D are completed with CR
(carriage return, ASCII: 013
Chapter 5.2 Establishing Connection to a PC, page 75
) as well.
dec
Operation
in the
85