Useful Adjustment Settings; Adjusting Image Positions (Av Mode Only); Adjusting Image Positions And Clock Automatically (Pc Mode Only); Adjusting Image Positions And Clock Manually (Pc Mode Only) - Pioneer PDP-505XDE Bedienungsanleitung

11

Useful Adjustment Settings

Adjusting image positions
(AV mode only)
Adjust the horizontal and vertical positions of images on the
Plasma Display.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Position" ( /
4
Select "H/V Position Adjust" ( /
Position
H/V Position Adjust
Reset
5
Adjust the vertical position ( / ) or the horizontal
position ( / ) .
6
Press HOME MENU to exit the menu.
• To restore the factory defaults for all items, press
select "Reset" in step 4, and then press ENTER. A confir-
mation screen appears. Press
then press ENTER.
• Adjustments are stored separately according to input
source.
Adjusting image positions and clock
automatically (PC mode only)
Use Auto Setup to automatically adjust the positions and
clock of images coming from a personal computer.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Auto Setup" ( /
Option
Auto Setup
Manual Setup
• Auto Setup starts.
4
Press HOME MENU to exit the menu.
• When Auto Setup is finished, "Auto Setup completed."
appears.
• Even when "Auto Setup completed" appears, Auto Setup
may have failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the Media Receiver and
switch it on before starting Auto Setup.
38
En
then ENTER).
then ENTER).
then ENTER).
/
/ to select "Yes", and
then ENTER).
then ENTER).
Adjusting image positions and clock
manually (PC mode only)
Usually you can easily adjust the positions and clock of
images using Auto Setup. Use Manual Setup to optimise the
positions and clock of images when necessary.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Manual Setup" ( /
4
Select the item to be adjusted ( /
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
5
Perform adjustment ( /
• Use / only when you adjust the vertical position
to
after selecting "H/V Position Adjust".
6
Press HOME MENU to exit the menu.
• To restore the factory defaults for all the items, press
to select "Reset" in step 4, and then press ENTER. A
confirmation screen appears. Press
and then press ENTER.
then ENTER).
then ENTER).
then ENTER).
0
0
and / ).
/ to select "Yes",
/