Cleaning And Maintenance; Troubleshooting - Concept PC5040 Bedienungsanleitung

5. SUPER RAPID
6. DOUGH
7. PASTA DOUGH
8. BUTTER MILK
9. GLUTEN FREE
10. CAKE
11. JAM
12. BAKE

CLEANING AND MAINTENANCE

Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool before cleaning and after use.
The unit and its accessories can be cleaned with a wet cloth.
Wash the replaceable parts in tepid water with detergent and rinse in clean water.
Do not immerse the baking pan in liquids. Just wash the inside with warm water with detergent and then rinse with
clean water. Clean the outer surfaces with a wet cloth.
Do not use steel wool, abrasive agents or solvents to clean the unit.
POSSIBLE PROBLEMS DURING BAKING
Bread has risen too much.
Bread has risen too much, then
collapsed.
Bread has not risen enough.
Crust is not well done.
Crust is brown on the sides, but
the crumb is not well done.
Sides and top of the loaf are
dusted with flour.

TROUBLESHOOTING

Cause
58
Downloaded from www.Manualslib.com
Program Preparation (hr:min)
1:15 – 1:20
1:50
0:15
3:17 – 3:30
3:40 – 3:55
1:30 – 1:40
1:20
1:00
Problem
Use a lower volume of ingredients and keep the dosage ratio.
Too little flour, too much yeast, too much water, or water is too hot.
Too much flour, too little yeast, too much water, not enough sugar, poor
quality of flour, water is too cold, unsuitable program. Keep the dosage ratio.
Program has been suspended for too long, frequent opening of the lid, too
much yeast, poor quality of flour, unsuitable program.
Too much water.
Too much flour, not enough water.
Problem
Solution
The mains outlet is not live.
The unit starts pre-heating
when program is launched.
manuals search engine
Cause
Příčina
Check the plug connection.
Check for voltage, e.g. by connecting
another appliance.
This is a normal function. This is not a
defect.
EN
Řešení
PC5040