Environmental Protection - Concept PC5040 Bedienungsanleitung

EN
The ventilation grille emits
smoke during baking.
Bread can hardly be removed.
After pressing START/STOP
button "H:HH" is displayed.
After pressing START/STOP
button "L:LL" is displayed.
After pressing START/STOP
button „ E:E0" or „ E:E1" is
displayed.
Motor moves after the program
starts, but there is no kneading.
Insufficiently risen bread when
using the delayed ON function.
SERVICE
Any larger maintenance or repairs requiring intervention into the internal parts of the product shall only be performed
by an authorized service

ENVIRONMENTAL PROTECTION

- Packaging materials and obsolete appliances should be recycled.
- The transport box may be disposed of as sorted waste.
- Polyethylene bags shall be handed over for recycling.
waste handling of this product. For more detailed information about the treatment, recovery and recycling of this
product, please contact your local city office, your household waste disposal service or the shop where you purchased
the product.
PC5040
Downloaded from www.Manualslib.com
Problem
Some ingredients or impurities
are in the heater.
Dirty kneading blade can't be
taken from the spindle.
Temperature in the baking area
is too high, e .g. after previous
baking.
The surrounding temperature
is too low.
Temperature sensor error
Incorrectly mounted baking
pan or kneading blade.
Yeast was in contact with
the salt or water before the
program started.
Recycling the product at the end of its service life
The symbol affixed to the product or its packaging indicates that the product may not be disposed of as
household waste. It must be taken to the collection facility authorized for recycling electric and electronic
waste. By ensuring that this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
manuals search engine
Příčina
Disconnect the cable from the socket.
Let the unit cool. Clean the heater.
After you remove the loaf, pour water in
the baking pan, let the kneading blade
soak, then clean it. Before mounting,
lubricate the spindle with edible oil or fat.
Disconnect the cable from the socket.
Open the lid, remove the baking pan, and
let the unit cool.
Move the unit to a place where the
temperature is 15 – 34 °C.
Have the unit checked by an authorized
service center.
Check the position of the baking pan and
kneading blade.
Make sure the yeast does not get in
contact with the water or salt.
Řešení
59